AquaGuard Pool Alarm Configuration

One AquaGuard Pool Alarm system will cover a typical 32’ X 16’ rectangular or kidney shaped swimming pool. If the pool is larger or irregular shaped, then you will need 2 systems (consult your AquaGuard dealer or us directly with questions). When using 2 systems, they can be operated via one wireless remote for ease of use. A spa will require a separate system.

An effective way to determine the required number of AquaGuard units is to simply measure the width and length of your pool. The following chart shows the maximum length of pool for both single and dual AquaGuard configurations.

Example Configuration 1:

A pool with a width of 18 feet and a length of 26 feet would require a single unit configuration.

Example Configuration 2:

A pool with a width of 13 feet and a length of 33 feet would require a dual unit configuration.

 

Pool Width (in feet)	Maximum Length Single Configuration (in feet)	Maximum Lenght Dual Configuration (in feet)
12.0	38.0	39 - 76
13.0	36.5	37 - 73
14.0	35.0	36 - 70
15.0	33.5	34 - 67
16.0	31.5	32 - 63
17.0	29.5	30 - 59
18.0	27.0	28 - 54
19.0	24.0	25 - 48
20.0	20.5	21 - 41

Configuration in Metric

Pool Width (in meters)	Maximum Length Single Unit Configuration (in meters)	Maximum Lenght Dual Unit Configuration (in meters)
3.7	11.6	12 - 23.2
4.0	11.1	11 - 22..2
4.3	10.7	11 - 21.3
4.6	10.2	11 - 20.4
4.9	9.6	10 - 19.2
5.2	9.0	9 - 18.0
5.5	8.2	9 - 16.5
5.8	7.3	8 - 14.6
6.1	6.3	7 - 12.5